NICET Special Hazards Systems Level I Exam Prep
Free practice questions

Free CET Practice Questions

10 exam-style questions with answers and explanations, straight from our 1,030-question bank. Tap an answer to check yourself. When you're ready, take the scored version in the free practice test.

Start the free practice test → ★★★★★4.9/5 from 2,400+ candidates · No signup

The CET exam has 83 questions and runs 2 hours 20 minutes.

These 10 free CET questions are organized by exam domain, so you can see how each part of the NICET Special Hazards Systems Level I blueprint is tested. Reveal the answer and explanation under each question.

Domain 1: Inspection, Testing, and Maintenance (43-49%)

Question 1

During an inspection, a clean-agent cylinder pressure is outside the documented acceptable range. What should the technician do first?

Show answer & explanation

Correct answer: A - Document the condition and follow required corrective procedures

Question 2

After a building renovation, which finding most directly requires evaluation of a special hazards system?

Show answer & explanation

Correct answer: B - Changed detection or mechanical component locations

Question 3

A discharge hose has corrosion and physical damage. What is the best response?

Show answer & explanation

Correct answer: C - Evaluate and correct the damaged component before service

Question 4

During testing, an alarm initiating device activates correctly when tested. What does this confirm?

Show answer & explanation

Correct answer: A - Expected alarm indication and response occurred

Domain 2: Repair and Recharge (6-12%)

Question 5

Damaged field wiring is found during service. Which task aligns with Level I repair work?

Show answer & explanation

Correct answer: A - Replace damaged electrical wiring using requirements

Domain 3: Installation (22-28%)

Question 6

A technician needs installation dimensions and component locations. Which source should be used?

Show answer & explanation

Correct answer: B - Project shop drawings

Question 7

Before mounting system components, what should be verified?

Show answer & explanation

Correct answer: A - Approved design and installation requirements

Question 8

Air-sampling piping installation should be verified against what?

Show answer & explanation

Correct answer: B - Approved design information

Domain 4: System Design and Configuration (11-17%)

Question 9

What is the primary purpose of codes and standards?

Show answer & explanation

Correct answer: A - Provide accepted requirements for design and installation

Question 10

A circuit has 120 volts and 5 amperes. Using P=V×I, what is the power?

Show answer & explanation

Correct answer: A - 600 watts representing circuit power

The rest of the CET blueprint

The CET exam also covers these domains. Drill them in the full free practice test:

That's 10 of 1,030

The full bank has 1,020 more CET questions with explanations.

Continue in the free practice test →

View plans